What We Make

Harness Bars

Harness Bars are a combination B-Pillar bar and 3 or 5 point Harness mount. They allow you to have a secure place to mount those shoulder harnesses.

Harness Bar and X Brace

X Braces

X Braces stiffen up the rear portion of the chassis. They are comprised of a welded X shaped brace that tie the rear strut tower to the c-pillar. We can do them as shown below or, if you have an existing C-Pillar bar and rear strut tower bar we can build around them. They are made out of steel giving them far less flex than the competition. We don’t make Miracle X bars, we make bars that are stronger and more robust than the competition bars. They serve one function. Connecting the C pillar and rear upper strut making the rear section of any car act as one, thus reducing the flex to a zero.

EG6 X Brace

Roll Bars

Just added to our repertoire, roll bars not only look awesome; they take the twist out of your chassis. Whether you’re going for the simple 4-Point with a harness bar, or something with a little more of a custom feel, we can build what you need. All of roll bars are constructed from 1.75” 1/8” wall DOM tubing. No drilling holes in the floor pan or trunk. We weld ALL of our roll bars in. We weld a 1/8” thick  4 X 4 inch plate to the floor, and then weld the bar directly to the plate. No torn bolt holes or second guessing what you’re drilling into.

Four Point Roll Bar

Four Point Roll Bar

Strut Bars are used to make your suspension do what it’s supposed to do. Instead of the strut towers flexing in corners your suspension does the work. This improves handling and provides more support in hard cornering. That’s why they come standard on the Type-R and SI’s.

Our bars come in a variety of colors to match your existing interior. Charcoal Grey, Green, Blue, White, and Red.

• Follow us on facebook
• Recommend on Facebook